Personalizing The World

dark garment printing!!

Help!! I am trying to print a simple white on a royal blue. It goes in for the underprint and then goes back in again and does nothing but slowly come back out, as if it should be printing but it doesnot.
WHAT AM I DOING WRONG?
How do I just print white on a garment?
Does it have to go in twice for white?
PLEASE HELP
THANKS

Mickie

Tags: dark, garment, underprint, white

▶ Reply to This

Replies to This Discussion

Permalink Reply by Chuck Northcutt on April 5, 2009 at 10:44am: If you bump up the highlight level control it should print white on the second pass.; ▶ Reply to This

Permalink Reply by Eddie Kleinfeld on April 5, 2009 at 3:17pm: I assume you are using EK print studio.

If you are printing a "white-only" image it may be going in for the second pass because the CMYK channels are still turned on. Enable the underbase on the main screen and reduce the ink level(CMYK) to "none" but make sure your white channels are still set to medium or heavy in your underbase settings.

With the underbase enabled and the cmyk levels turned to none, it should reduce the printing to a single pass.

If this does not eliminate the problem. I have a few more suggestions that may help you.

Best regards,
Eddie K
ekleinfeld.com; ▶ Reply to This

Permalink Reply by Mickie Mantle on April 5, 2009 at 3:37pm: THANKS TO BOTH OF YOU I will try each!!; ▶ Reply to This

▶ Reply to This

RSS

Welcome to
MelcoWorld

Sign Up
or Sign In

DesignShop V9 Release

Learn about the revolutionary features in DesignShop V9 HERE. Special Offers for a limited time, contact your representative. In the USA Call 800.799.8313 International Sales Contact your Melco Distributor HERE. For Information on New Features and Minimum PC Requirements Click Here.

Melco on Facebook

Melco Business Opportunities on Facebook

Badges | Report an Issue | Terms of Service